Key Features:
.High-precision algorithm is adopted for stable and efficient operation and support for high-speed operation. Equipped with a high-power laser module, with good heat dissipation performance, taking into account accuracy and speed, making the engraving effect better
.It adopts bracelet wiring + gantry double Y-axis design, applies gantry double drive system, three-axis simultaneous movement, double Y-axis and X-axis simultaneous movement, taking both accuracy and speed into consideration. Red light assisted positioning can cast two red lights, keep parallel with X axis and Y axis, effectively solve the problem of engraving positioning, convenient, fast, time saving
.Automatically remember the last engraving content for batch engraving. Short-press positioning, long-press engraving data can be stored for a long time, and it will not affect the power on and off, so there is no need to keep connected to the computer. Powerful software, easy to operate
.Four engraving modes: black and white, discrete, sketch, contour rotation laser head focus, the smaller the focus, the better the engraving effect
.This is a device that can connect to the machine via mobile phone WiFi and control the engraving through the APP, without the need of a computer, free from the constraints of the computer and the data cable, DIY anytime, anywhere, you can edit text, draw or enter custom text, artistic words, etc. Engraving immediately after making the content, the rest is waiting for a wonderful scene
.One machine can meet your various needs. There are many materials that can be engraved and the application range is wide. It can be used for engraving trademarks, QR codes, patterns, texts, etc
.Laser power is 4.5W; not only engraving, but also can cut paper, wood, leather, non-woven fabric, non-woven fabric, etc. within 2.5mm for making paper-cut effect. Non-light-transmitting plastic sheet within 1mm, cake insert glitter paper, etc.
.Supported engraving materials: wood, paper, leather, bamboo, acrylic, ceramics, some stone, plastic, rubber, pebbles, stainless steel (carved white stainless steel requires black whiteboard pen to be blackened to be engraved), metal painted surface, anodized , Dark plating, electrophoretic paint. With colored paper, ceramics, glass, crystal, and some stone can be carved
.How to use the color paper: 1. Cut the special color stickers to fit the size stickers. You need to soak them and put them on the engraving. 2. Soak in the water for about three minutes. The white side is pasted on the engraving, and the excess water is wiped off with a rag, and the surface remains smooth without wrinkles. Dry for a few minutes after drying, or blow dry with a hair dryer before carving. 3. The engraving depth is generally adjusted to 30. If it is white colored paper, the depth of the 2.5 watt machine needs to be adjusted to 80.5 watts. The machine needs to be adjusted to 50. After engraving in the water for three or five minutes, scraping off the colored paper can display the corresponding color ) And other combustible materials
.Materials that cannot be engraved: those that cannot be burned and cannot be focused; for example, metal without any coating, transparent plastic, white paper (the effect of astigmatism is not good), the engraving stroke can reach 290mmx220mm, and the engraving range is not limited Wider
.Support JPG / JPEG / PNG picture format. Supported operating systems: Win7 / Win8 / Win10 / XP / IOS, the recommended engraving values are: woodwork 5 ~ 15, leatherwear 0 ~ 5, paper products 5 ~ 10, bamboo 10 ~ 20, plastic 0 ~ 5, paint metal 20 ~ 25 , Glass Ceramic 20 ~ 30, Electroplated metal 50 ~ 55, Stainless steel 304/201 50 ~ 55 (this value is for reference only, the actual value of the engraving effect is subject to the test of the waste sample by yourself)
.Suitable for DIY hobby, this machine is an introductory learning mode, suitable for a small amount of entertainment, personal customization or playing by yourself, marking, lettering, engraving, carving, hand tools, can not be compared with commercial machines
Specifications:
.Material: Aluminum Alloy + Acrylic + PCB Board
.Supported Image formats: JPEG, JPG, PNG, BMP
.Supported Systems: Win7 / Win8 / Win10 / XP / IOS
.Carving Area: 29 x 22cm
.Software Language: English \ Japanese \ Chinese
.Product Dimensions: 45 x 40 x 22cm
.Product Weight: 2850g
.Package Dimensions: 50 x 47.5 x 21cm
.Package Weight: 4700g
.Packing: EPE + Carton Box
Package Content:
.1 x Engraving Machine
.1 x 12V Power Supply
.1 x USB Cable
.1 x Safety Glasses
.1 x Cowhide Test Paper
.2 x Dedicated Color Paper (Black 27 x 39cm)
.1 x U Disk Software or Installation Operation Video
.1 x Chinese and English Manual